Husqvarna 529351902 Operator'S Manual Download Page 4

CAUTION: 

Used if there is a risk of

damage to the product, other materials or

the adjacent area if the instructions in the

manual are not obeyed.

Note: 

Used to give more information that is necessary

in a given situation.

General power tool safety warnings

WARNING: 

Read all safety warnings,

instructions, illustrations and specifications

provided with this power tool. Failure to

follow all instructions listed below may result

in electric shock, fire and/or serious injury.

• Save all warnings and instructions for future

reference. The term "power tool" in the warnings

refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Hedge trimmer safety warnings

• Keep all parts of the body away from the blade. Do

not remove cut material or hold material to be cut

when blades are moving. 

Blades continue to move

after the switch is turned off. A moment of inattention

while operating the hedge trimmer may result in

serious personal injury.

• Carry the hedge trimmer by the handle with the

cutter blade stopped and taking care not to operate

any power switch. 

Proper carrying of the hedge

trimmer will decrease the risk of inadvertent starting

and resultant personal injury from the blades.

• When transporting or storing the hedge trimmer,

always fit the blade cover. 

Proper handling of the

hedge trimmer will decrease the risk of personal

injury from the blades.

• When clearing jammed material or servicing the unit,

make sure all power switches are off and the lock-off

is in the locked position. 

Unexpected actuation of

the hedge trimmer while clearing jammed material or

servicing may result in serious personal injury.

• Hold the hedge trimmer by insulated gripping

surfaces only, because the blade may contact

hidden wiring or its own cord. 

Blades contacting a

"live" wire may make exposed metal parts of the

hedge trimmer "live" and could give the operator an

electric shock.

• Keep all power cords and cables away from cutting

area. 

Power cords or cables may be hidden in

hedges or bushes and can be accidentally cut by the

blade.

• Do not use the hedge trimmer in bad weather

conditions, especially when there is a risk of

lightning. 

This decreases the risk of being struck by

lightning.

Safety instructions for extended reach

hedge trimmers

• To reduce the risk of electrocution, never use the

extended-reach hedge trimmer near any electrical

power lines. Contact with or use near power lines

may cause serious injury or electric shock resulting

in death.

• Always use two hands when operating the extended-

reach hedge trimmer. Hold the extended-reach

hedge trimmer with both hands to avoid loss of

control.

• Always use head protection when operating the

extended-reach hedge trimmer overhead. Falling

debris can result in serious personal injury.

General safety instructions

WARNING: 

Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

• Please read the operator’s manual carefully and

make sure you understand the instructions before

using the attachment.

• These instructions supplement the instructions

that were included with the product. For other

procedures, please refer to the operating instructions

for the product.

• Under no circumstances may the design of the

attachment be modified without the permission of

the manufacturer. Do not use an attachment that

appears to have been modified by others and

always use original accessories. Non-authorized

modifications and/or accessories can result in

serious personal injury or the death of the operator

or others.

Save all warnings and instructions for

future reference
Safety instructions for operation

• If you encounter a situation where you are uncertain

how to proceed you should ask an expert. Contact

your dealer or your service workshop.

• Avoid all usage which you consider to be beyond

your capability.

• Cutting tool. Do not touch the tool without first,

switching off the engine/remove the battery.

• Never allow children to use the product.
• Ensure that no-one comes closer than 15 m while

you are working.

• Never allow anyone else to use the product without

first ensuring that they have understood the contents

of the operator’s manual.

4

1917 - 001 - 18.07.2022

Summary of Contents for 529351902

































Reviews: