ASSEMBLY
11
1740274
HOW TO ASSEMBLE THE HANDLE
1. Remove the packing material from the upper and lower
handles.
2. Loosen the
knobs
on each side of the
handle.
(See
Figure 3)
3. Raise the upper
handle
to the operating position (see
Figure 4). Hold the upper
handle
apart to prevent
scratching the lower handle.
NOTE: Make sure the cables are not caught between
the upper and lower handle.
4. Tighten the
knobs.
Upper Handle
Knob
Figure 3
Lower Handle
Chute Crank Rod
Upper Handle
Knob
Figure 4
Lower Handle
HOW TO INSTALL THE CHUTE
1. Remove the three bolts and
lock nuts
from the chute
base (see Figure 5).
2. Install the
chute
with the bolts and
locknuts.
Make sure
the
locknuts
are to the outside as shown. Tighten
securely.
Figure 5
Locknuts
Chute
Chute
Figure 6
Summary of Contents for 521SSE
Page 28: ......
