Husqvarna 455e-series Rancher TrioBrake, Operator'S Manual

Page: 9 / 36

INTRODUCTION
English
–
9
1153598-26 Rev.1 2010-08-25
Dear Customer,
Congratulations on your choice to buy a Husqvarna
product! Husqvarna is based on a tradition that dates
back to 1689, when the Swedish King Karl XI ordered the
construction of a factory on the banks of the Husqvarna
River, for production of muskets. The location was logical,
since water power was harnessed from the Huskvarna
River to create the water-powered plant. During the more
than 300 years of beeing, the Husqvarna factory has
produced a lot of different products, from wood stoves to
modern kitchen appliances, sewing machines, bicycles,
motorcycles etc. In 1956, the first motor driven lawn
mowers appeared, followed by chain saws in 1959, and it
is within this area Husqvarna is working today.
Today Husqvarna is one of the leading manufacturers in
the world of forest and garden products, with quality as
our highest priority. The business concept is to develop,
manufacture and market motor driven products for
forestry and gardening as well as for building and
construction industry. Husqvarna
′
s aim is also to be in the
front edge according to ergonomics, usability, security
and environmental protection. That is the reason why we
have developed many different features to provide our
products within these areas.
We are convinced that you will appreciate with great
satisfaction the quality and performance of our product for
a very long time to come. The purchase of one of our
products gives you access to professional help with
repairs and service whenever this may be necessary. If
the retailer who sells your machine is not one of our
authorised dealers, ask for the address of your nearest
service workshop.
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. Think of
this operator
′
s manual as a valuable document. By
following its
′
content (using, service, maintenance etc) the
life span and the second-hand value of the machine can
be extended. If you will sell this machine, make sure that
the buyer will get the operator
′
s manual.
Thank you for using a Husqvarna product.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
What is what on the chain saw? (1)
1 Cylinder cover
2 Starter handle
3 Air purge
4 Stop switch (Ignition on/off switch.)
5 Rear handle
6 Fuel tank
7 Choke control/Start throttle lock
8 Adjuster screws carburettor
9 Starter
10 Chain oil tank
11 Throttle lockout
12 Decompression valve
13 Front handle
14 Front hand guard
15 Muffler
16 Bar tip sprocket
17 Chain
18 Bar
19 Spike bumper
20 Chain catcher
21 Oil pump adjustment screw
22 Clutch cover
23 Right hand guard
24 Throttle control
25 Operator
′
s manual
26 Combination spanner
27 Bar guard
28 Information and warning decal
29 Product and serial number plate
30 Chain tensioner wheel
31 Knob
32 Right-hand brake trigger