Husqvarna 455e-series Rancher TrioBrake, Operator'S Manual

Page: 8 / 36

CONTENTS
8 – English 1153598-26 Rev.1 2010-08-25
Contents
KEY TO SYMBOLS
Symbols on the machine: ...................................... 7
Symbols in the operator’s manual: ........................ 7
CONTENTS
Contents ............................................................... 8
INTRODUCTION
Dear Customer, ..................................................... 9
WHAT IS WHAT?
What is what on the chain saw? ........................... 9
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 10
Important .............................................................. 10
Always use common sense .................................. 10
Personal protective equipment ............................. 11
Machine
′
s safety equipment ................................. 11
Cutting equipment ................................................. 13
ASSEMBLY
Fitting the bar and chain ....................................... 17
FUEL HANDLING
Fuel ....................................................................... 18
Fuelling ................................................................. 19
Fuel safety ............................................................ 19
STARTING AND STOPPING
Starting and stopping ............................................ 20
WORKING TECHNIQUES
Before use: ............................................................ 21
General working instructions ................................ 21
How to avoid kickback ........................................... 24
MAINTENANCE
General ................................................................. 25
Carburettor adjustment ......................................... 25
Checking, maintaining and servicing chain saw
safety equipment .................................................. 26
Muffler ................................................................... 27
Starter ................................................................... 27
Air filter .................................................................. 28
Spark plug ............................................................. 28
Lubricating the bar tip sprocket ............................. 28
Needle bearing lubrication .................................... 28
Adjustment of the oil pump ................................... 28
Cooling system ..................................................... 28
”Air Injection” centrifugal cleaning ......................... 29
Winter use ............................................................. 29
Maintenance schedule .......................................... 30
TECHNICAL DATA
Technical data ....................................................... 31
Bar and chain combinations ................................. 32
Saw chain filing and file gauges ........................... 32
EC-declaration of conformity ................................ 33