Husqvarna 42" Collection System, Operator And Parts Manual, Page: 3 / 20

CONTENTS
SAFETY RULES .........................................................4
SERVICE ............................................................5
OPERATION ............................................................. 11
TIPS FOR IMPROVED BAGGING ................... 11
GENERAL RECOMMENDATIONS .................. 11
REPAIR PARTS ........................................................12
BLOWER ..........................................................12
CHUTES, MOUNTS, BELTS ............................14
BAGGER ..........................................................16
TOOLS REQUIRED
• Wrench or ratchet and socket
7
/
16
"
• Wrench or ratchet and socket ½"
• Wrench ¾"
• Drill and
3
/
8
" bit
• Torque Wrench
• Hammer
CONTAINER CONTENTS
• Blower Assembly • Containers
• Bagger Assembly • Shields
• Belts • Seal Fastening Kit
• Mounting Brackets • Bag of Hardware
CAUTION
BEFORE ASSEMBLING GRASS
CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in
NEUTRAL position.
• Turn ignition key OFF and remove
key.
• Make sure the blades and all
moving parts have completely
stopped.
• Disconnect spark plug and place
wire where it cannot come in
contact with plug.
NOTE: When the terms RH (right hand) or
LH (left hand) are used, it refers to when the
operator is seated on the mower.
STORAGE
When grass catcher is to be stored for a period of
time, clean it thoroughly, remove all dirt, grass, leaves,
etc. Store in a clean, dry place.