Husqvarna 339XP, Operator'S Manual

Page: 22 / 92

STARTING AND STOPPING
22 – English
starts. When the engine starts, quickly apply full throttle to
automatically disengage fast idle.
As the chain brake is still activated the engine must return
to idling speed as soon as possible by disengaging the
throttel latch in order to avoid unnecessery wear on the
clutch assembly.
Note! Pull the front hand guard towards the front handle.
The chain brake is now disengaged. Your saw is ready for
use.
• Never start a chain saw unless the bar, chain and
clutch cover are fitted correctly. See instructions under
the heading Assembly. Without a bar and chain
attached to the chain saw the clutch can come loose
and cause serious injury.
• The chain brake should be activated when starting. Se
instructions under the heading Start and stop. Do not
drop start. This method is very dangerous because
you may lose control of the saw.
• Never start the machine indoors. Exhaust fumes can
be dangerous if inhaled.
• Observe your surroundings and make sure that there
is no risk of people or animals coming into contact with
the cutting equipment.
• Always hold the saw with both hands. The right hand
should be on the rear handle, and the left hand on the
front handle. All people, whether right or left handed,
should use this grip. Use a firm grip with thumbs and
fingers encircling the chain saw handles.
Stopping
The engine is stopped by pushing the stop switch to the
stop position.
!
WARNING! Long term inhalation of the
engine’s exhaust fumes, chain oil mist
and dust from sawdust can represent a
health risk.