Husqvarna 225BX-SERIES, Operator'S Manual

Page: 14 / 28

14
– English
START AND STOP
WARNING!
Never start the blower if the
inspection cover is not closed, is
damaged or cannot be closed.
(Exception: When the vacuum tube
is fitted).
!
Start
Start and stop
Cold engine
IGNITION:
Set the stop switch to the start position.
CHOKE:
Set the choke control in the choke position (A).
AIR PURGE:
Press the air purge diaphragm repeatedly until
fuel begins to fill the diaphragm. The diaphragm
need not be completely filled.
Warm engine
Use the same starting procedure as for the cold
engine, but do not set the choke control in the choke
position.
For throttle handles without a start throttle lock:
The start throttle position is obtained by setting the
choke control in the choke position and then
returning it to its original position.
IMPORTANT!
Do not pull out the starter cord completely
and do not release the starter handle from
the fully pulled out position. Doing so will
damage the starter
A
B