12 SERVICE WORK ON THE CHASSIS
55
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (
B01815-10
Main work
(FE 350 EU, FE 350 AUS)
–
Remove all screws on the main silencer.
–
Take off silencer cap
1
and O-ring
2
.
–
Take off outer tube
3
and O-ring
4
.
–
Pull glass fiber yarn filling
5
off of inner tube
6
.
–
Clean the parts that need to be reinstalled.
–
Mount the new glass fiber yarn filling
5
on the inner tube.
–
Slide O-ring
4
and outer tube
3
over the glass fiber yarn filling.
–
Insert O-ring
2
and silencer cap
1
into the outer tube.
–
Mount and tighten all of the screws.
101426-10
(FE 350 USA)
–
Remove screws
1
of connecting cap
2
.
–
Take off connecting cap
2
with perforated pipe, O-ring
3
and glass fiber yarn
filling
4
.
–
Remove screws
5
and silencer cap
6
with O-ring
7
.
–
Remove screws
8
and insert
9
together with the insulating pad
bk
.
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the new insulating pad
bk
on insert
9
and secure it with adhesive tape.
–
Slide insert
9
with insulating pad
bk
into the main silencer and secure with
screws
8
.
–
Mount O-ring
3
onto connecting cap
2
.
–
Slide the new glass fiber yarn filling
4
over the perforated pipe.
–
Mount connecting cap
2
and glass fiber yarn filling
4
in the main silencer.
Info
Slide the glass fiber yarn filling into the main silencer with a blunt tool.
–
Mount and tighten screws
1
.
–
Mount O-ring
7
on silencer cap
6
.
–
Position silencer cap
6
. Mount and tighten screws
5
.
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
12.33
Removing the right side cover
B01813-10
–
Remove screw
1
.
–
Pull off the side cover in area
A
sideways and remove it toward the rear.
