ASSEMBLY
10 – English
Fitting the loop handle
•
Clip the loop handle onto the shaft. Note that the loop
handle must be fitted between the arrows on the shaft.
•
Fit the bolt, securing plate and wing nut as shown in
the diagram. Tighten the wing nut.
Fitting the trimmer guard and
trimmer head
•
Fit the guard as shown in the diagram. Tighten
securely.
•
Fit the dust cup on the shaft. The nut must be
completely covered by the dust cup.
•
Hold the dust cup with a spanner to prevent the shaft
from rotating.
•
Screw the trimmer head onto the shaft.
Assembling and dismantling the
two-piece shaft (122LDx-series)
Assembly:
•
Loosen the coupling by turning the knob.
•
Align the tab of the attachment (A) with the arrow on
the coupling (B).
•
Push the attachment into the coupling until the
attachment snaps into place.
Before using the unit, tighten the knob securely.
A
B
Summary of Contents for 122 LD X-series
