background image

 

English

 

2  

 

YOUR WARRANTY RIGHTS 
AND OBLIGATIONS

 

The EPA (The US Environmental Protection Agency), 
CARB (California Air Resources Board), Environment 
Canada and Husqvarna Forest & Garden are pleased to 
explain the emissions control system warranty on your 
2007 and later small nonroad engine. In U.S. and 
Canada, new small nonroad engines must be designed, 
built and equipped to meet the federal stringent anti-
smog standards. Husqvarna Forest & Garden must 
warrant the emission control system on your small 
nonroad engine for the period of time listed below 
provided there has been no abuse, neglect or improper 
maintenance of your unit. Your emission control system 
includes Parts such as the carburetor, fuel tank and the 
ignition system. Where a warrantable condition exists, 
Husqvarna Forest & Garden will repair your small 
nonroad engine at no cost to you. Expenses covered 
under warranty include diagnosis, parts and labor.

 

MANUFACTURER’S WAR-
RANTY COVERAGE

 

The 2007 and later small nonroad engines are 
warranted for two years. If any emission related part on 
you engine (as listed above) is defective, the part will be 
repaired or replaced by Husqvarna Forest & Garden.

 

OWNER’S WARRANTY 
RESPONSIBILITIES

 

As the small nonroad engine owner, you are responsible 
for the performance of the required maintenance listed 
in your Operator’s Manual. Husqvarna Forest & Garden 
recommends that you retain all receipts covering 
maintenance on your small nonroad engine, but 
Husqvarna Forest & Garden cannot deny warranty 
solely for the lack of receipts or for your failure to ensure 
the performance of all scheduled maintenance. As the 
small nonroad engine owner, you should, however, be 
aware that Husqvarna Forest & Garden may deny you 
warranty coverage if your small nonroad engine or a 
part of it has failed due to abuse, neglect, improper 
maintenance, unapproved modifications or the use of 
parts not made or approved by the original equipment 
manufacturer. You are responsible for presenting your 
small nonroad engine to a Husqvarna Forest & Garden 
authorized servicing dealer as soon as a problem 
exists. The warranty repairs should be completed in a 
reasonable amount of time, not to exceed 30 days. If 
you have any questions regarding your warranty rights 
and responsibilities, you should contact your nearest 
authorized servicing dealer or call Husqvarna Forest & 
Garden at 1-800-487-5963.

 

WARRANTY COMMENCE-
MENT DATE

 

The warranty period begins on the date small nonroad 
engine is delivered.

 

LENGTH OF COVERAGE

 

Husqvarna Forest & Garden warrants to the initial owner 
and each subsequent purchaser that the engine is free 
from defects in materials and workmanship which cause 
the failure of a warranted part for a period of two years.

 

WHAT IS COVERED

 

REPAIR OR REPLACEMENT OF PARTS

 

 Repair or 

replacement of any warranted part will be performed at 
no charge to the owner at an approved Husqvarna 
Forest & Garden servicing dealer. If you have any 
questions regarding your warranty rights and 

responsibilities, you should contact your nearest 
authorized servicing dealer or call Husqvarna Forest & 
Garden at 1-800-487-5963.

 

WARRANTY PERIOD

 

 Any warranted part which is not 

scheduled for replacement as required maintenance, or 
which is scheduled only for regular inspection to the 
effect of “repair or replace as necessary” shall be 
warranted for 2 years. Any warranted part which is 
scheduled for replacement as required maintenance 
shall be warranted for the period of time up to the first 
scheduled replacement point for that part.

 

DIAGNOSIS

 

 The owner shall not be charged for 

diagnostic labor which leads to the determination that a 
warranted part is defective, if the diagnostic work is 
performed at an approved Husqvarna Forest & Garden 
servicing dealer.

 

CONSEQUENTIAL DAMAGES

 

 Husqvarna Forest & 

Garden may be liable for damages to other engine 
components caused by the failure of a warranted part 
still under warranty.

 

WHAT IS NOT COVERED

 

All failures caused by abuse, neglect or improper 
maintenance are not covered.

 

ADD -ON OR MODIFIED PARTS

 

The use of add-on or modified parts can be grounds for 
disallowing a warranty claim. Husqvarna Forest & 
Garden is not liable to cover failures of warranted parts 
caused by the use of add-on or modified parts.

 

HOW TO FILE A CLAIM

 

If you have any questions regarding your warranty rights 
and responsibilities, you should contact your nearest 
authorized servicing dealer or call Husqvarna Forest & 
Garden at 1-800-487-5963.

 

WHERE TO GET WARRANTY 
SERVICE

 

Warranty services or repairs shall be provided at all 
Husqvarna Forest & Garden authorized servicing 
dealers.

 

MAINTENANCE, REPLACE-
MENT AND REPAIR OF EMIS-
SION-RELATED PARTS

 

Any Husqvarna Forest & Garden approved replacement 
part used in the performance of any warranty maintenance 
or repairs on emission-related parts, will be provided 
without charge to the owner if the part is under warranty.

 

EMISSION CONTROL WAR-
RANTY PARTS LIST

 

1

Carburetor and internal parts

2

Intake pipe, airfilter holder and carburetor bolts.

3

Airfilter and fuelfilter covered up to maintenance 
schedule.

4

Ignition System 
1 Spark Plug, covered up to maintenance schedule
2 Ignition Module

5

Fuel tank with cap and pipe

 

MAINTENANCE STATEMENT

 

The owner is responsible for the performance of all 
required maintenance, as defined in the operator’s 
manual.

 

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

 

150BT_US.fm  Page 2  Friday, April 10, 2009  9:51 AM

Summary of Contents for 115 24 05-95



















Reviews: