Husqvarna Viking Opal 650, User Manual

Page: 62 / 68

A
60 –
7DNLQJ&DUHRI\RXU0DFKLQH
CLEANING THE MACHINE
To keep your sewing machine operating well, clean it often.
1ROXEULFDWLRQRLOLQJLVQHHGHG
Wipe the exterior surfaces of your sewing machine with a soft
cloth to remove any dust or lint built up.
Press the ON/OFF switch to OFF.
Clean the Bobbin Area
Remove the presser foot and slide off the bobbin cover.
Lower the feed teeth. Place the screwdriver under the
stitchplate as shown on the picture and gently turn the
screwdriver to pop off the stitch plate. Clean the feed teeth
with the brush.
Cleaning Under the Bobbin Area
After sewing several projects or any time you notice an
accumulation of lint in the bobbin case area, the area under
the bobbin case must be cleaned.
5HPRYHWKHEREELQFDVHKROGHUFRYHULQJWKHIURQWSDUWRI
WKHEREELQFDVH5HPRYHWKHEREELQFDVHE\OLIWLQJLWXS
Clean with the brush. A small vacuum attachment works well
to remove dust and lint built up.
On model 670/690Q: Use caution when cleaning around the
thread cut knife (A).
Put the bobbin case and the bobbin case holder back in place.
Note: Do not blow air into the bobbin case area. The dust and lint will
be blown into your machine.
Replacing the Stitch Plate
:LWKIHHGWHHWKORZHUHGSODFHWKHVWLWFKSODWHVRWKDWLWÀWV
into the notch at the back. Press the stitch plate down until it
FOLFNVLQWRSODFH6OLGHRQEREELQFRYHU