Husqvarna Viking Huskylock 936, User Manual

Page: 62 / 78

2
1
3
4
—58—
Fabric guide
Pearl guide
10. OPTIONAL ACCESSORIES
10-1. Presser feet-optional accessories
Accessory feet and waste tray available. See
your local dealer for these accessories.
Pearl foot (Option)
(Part number : 2141002-501)
(Part number, for USA only : 141 000598)
1. Change stitch width to 7.
2. Remove right needle.
3. Pull stitch fi nger lever toward you to “R” posi-
tion for rolled edge.
4. Replace regular presser foot with pearl foot.
5. Set stitch length at 4 to 5 depending upon the
size of pearl.
6. Fold fabric along a line to be stitched with
pearl chain. Feed the folded edge through
the fabric guide of the foot.
Note : You can also sew down center of fabric
using fl atlock setting, page 35.
7. Place pearl chain on pearl guide.
8. Start sewing.
Gathering foot (Option)
(Part number : 2141002-502)
(Part number, for USA only : 141 000599)
This foot, also known as a gathering foot or
Shirring foot, is used for joining two pieces of
lightweight fabric while gathering only one of
the fabric layers as it is stitched to the fl at layer.
Preparation of machine
Differential feed ratio: 2-2.5.
Presser foot: Gathering foot.
Stitch Length: 3-5.
Needle: Two needles or one needle.
Stitch fi nger: Normal.
1. Snap on the gathering foot.
2. Raise the presser foot.
3. Bring needle(s) to the highest position.
4. Place bottom fabric layer
➀
between needle
plate and gathering foot with right side up
and insert it up to the needle against the up-
per cutter.
5. Place top fabric layer
➁
with right side down
in opening of gathering foot
➂
and fl ush with
the bottom layer.
6. Lower the presser foot.
7. Make a sewing test. Guiding fabric against
fabric guide
④
.
8. Allow bottom fabric layer to feed freely and
gather while top layer simply guides through
at 1:1 ratio.