Husqvarna Viking Huskylock 936, User Manual

Page: 48 / 78

Cover stitch looper threading (B)
1. Raise the presser foot.
2. Open front cover.
3. Pull thread from spool through guide
➀
of the
thread stand and then through guide
➁
.
Note : Make sure the thread snaps into the slot
of guide
➁
, and then thread through
➂
to
➅
.
4. Turn the handwheel toward you and position
the double chain stitch looper to the far right.
5. When you push the looper threading knob in
the direction of the knob arrow as shown, the
double chain stitch looper moves to the right,
and you can pass thread into the thread hole
at the end of the looper more easily.
6. Then thread through guides
➆
to
➈
.
7. Pull out the thread leaving about 10 cm.
8. When you start stitching after threading, the
knob returns to the original position automati-
cally.
—44—
C D A B
E
1
2
5
6
7
8
9
4
3
7
8
9