4
Operation
Using the worklight
Insert the 3-prong plug into a grounded receptacle.
(Optional) Use the hook (E) to hang the worklight from a
hook or structural support. Use the magnets to attach
the worklight to a metal surface.
D
E
Care and Cleaning
WARNING:
Always make sure that the worklight is
unplugged and cooled down before attempting to clean it.
Clean the worklight with a non-abrasive cleaner.
Allow the worklight to cool down completely before storing.
Store in a safe place, out of the reach of children.
Troubleshooting
If the worklight does not work, check the following:
Verify that the light is properly plugged into the power source.
Verify that the switch is in the ON position.
□
Press the On/Off button (D) in the ( ) position to turn the
worklight on for 100% brightness (1200 lm).
□
Press the On/Off button (D) in the ( ) position to turn the
worklight on for 50% brightness (600 lm).
□
Press the On/Off button (D) in the ( )position to turn the
worklight off.
