Husky HU80522, Operator'S Manual

Page: 12 / 22

12
ASSEMBLY
CONNECTING THE HIGH PRESSURE HOSE TO
THE PUMP
See Figure 7.
������After the high pressure hose has been uncoiled and attached
to the spray wand:

Align the collar on the threaded nipple on the pump.

Insert the nozzle on the end of the high pressure hose
collar into the threaded nipple.

Turn the collar clockwise to tighten the hose securely to
the pump.

Pull on the hose to be certain it is properly secured.
CONNECTING THE GARDEN HOSE TO THE
PRESSURE WASHER
See Figure 8.
The water supply must come from a water main. NEVER use
hot water or water from pools, lakes, etc.
Before connecting the garden hose to the pressure
washer:
 Run water through the hose for 30 seconds to clean any
debris from the hose.

Inspect the screen in the water intake.

If the screen is damaged, do not use the machine until
the screen has been replaced.

If the screen is dirty, clean it before connecting the garden
hose to the machine.
������To connect the garden hose to the machine:
 Uncoil the garden hose.
NOTE: There must be a minimum of 10 feet of
unrestricted hose between the pressure washer intake and
the hose faucet or shut off valve (such as a “Y” shut off
connector).

With the hose faucet turned completely off, attach the
end of the garden hose to the water intake. Tighten by
hand.
Fig. 8
Fig. 7
GARDEN
HOSE
COLLAR
THREADED
NIPPLE
SCREEN
WATER
INTAKE