background image

12

ASSEMBLY

CONNECTING THE HIGH PRESSURE HOSE TO 
THE PUMP

See Figure 9.

������After the high pressure hose has been uncoiled and attached 
to the spray wand:

  Align the collar on the threaded nipple on the pump.

  Insert the 

nozzle on the end of the high pressure hose 

collar into the threaded nipple.

 

Turn the collar clockwise to tighten the hose securely to 
the pump.

 

Pull on the hose to be certain it is properly secured.

CONNECTING  THE  GARDEN  HOSE  TO  THE 
PRESSURE WASHER

See Figure 10.

The water supply must come from a water main. NEVER 
use  hot  water  or  water  from  pools,  lakes,  etc.  Before  
connecting the garden hose to the pressure washer:

 

Run water through the hose for 30 seconds to clean any 
debris from the hose.

 

Inspect the screen in the water intake.

 

If the screen is damaged, do not use the machine until 
the screen has been replaced.

  If the screen is dirty, clean it before connecting the garden 

hose to the machine.

������To connect the garden hose to the machine:

  Uncoil the garden hose.

 

NOTE: 

There  must  be  a  minimum  of  10  feet  of  

unrestricted hose between the pressure washer intake and 
the hose faucet or shut off valve (such as a “Y” shut off  
connector).

  With the hose faucet turned completely off, attach the 

end of the garden hose to the water intake. Tighten by 
hand.

OPERATION

WARNING:

Do not use any attachments or accessories not recom-
mended  by  the  manufacturer  of  this  tool.  The  use  of   
attachments or accessories not recommended can result 
in serious personal injury.

WARNING:

Do not direct discharge stream at persons. Failure to heed 
this warning could result in serious injury.

WARNING:

Do  not  allow  familiarity  with  tools  to  make  you  care-
less. Remember that a careless fraction of a second is 
sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side 
shields  when  operating  tools.  Failure  to  do  so  could   
result in objects being thrown into your eyes, resulting in 
possible serious injury.

Fig. 10

Fig. 9

COLLAR

THREADED 

NIPPLE

SCREEN

GARDEN 

HOSE

WATER  

INTAKE

Summary of Contents for HU80520























Reviews: