Husky EZ WIRE, Installation Instructions Manual

Page: 8 / 15

SINGLE SLIDE DOOR
•
Slide doors can be installed inside or outside .
•
The inside distance between the posts is measuring
width of the door – 2 ½”. (If a panel is installed
above the door, the opening between the posts will
be the width of the panel)
•
Install lock in the door first.
•
Attach two 4-wheel trolley per door in the ½”
diameter holes provided.
•
Using 5/16” x 3” carriage bolts and nuts, install
Latch Receiver and Bottom Slam.
•
Install the Track Bracket to the post on either side of
TRACK
BRACKET
OVERHEAD
TRACK
•
Install the Track Bracket to the post on either side of
the door opening using 5/16” x 3 ½” carriage bolts
and nuts. A third Track bracket can be installed on
the post or to the panel using Panel Kit Plate.
•
Install the Door Track in the Track Brackets. Secure
the Track by tightening ¼” screw provided.
•
Slide the door trolleys into the overhead Track.
•
Install a track bumper as a keeper for the door
Trolleys.
•
Attach the Bottom Guide as shown.
LATCH
RECEIVER
BOTTOM SLAM
BOTTOM
GUIDE
8