5
Troubleshooting
Before calling Technical Support, please check the following points; you may be able to solve any
problem yourself.
Technical Support: 01455 555340 (UK)
Problem
The chiller does not
work properly.
The chiller’s internal
temperature is too
high or too low.
The chiller is noisy in
operation or makes
unusual noises.
•
Note: It is normal to
hear some noises as
refrigerant flows through
the compressor.
Outer surfaces are wet
Inner surfaces are wet
Possible Cause
The chiller is not plugged in.
The plug and/or the power cable
are faulty.
The fuse has blown.
The chiller is faulty.
The wrong temperature is selected.
The factory default settings for the
controller are incorrect.
The condenser is blocked by an
accumulation of dust.
The doors are not fully closed.
The chiller is close to a heat source
or the ambient temperature is too
high.
The ventilation grille is blocked.
The chiller is not on a level, firm
surface, or the unit may be touching
other items.
The chiller is vibrating against a
neighbouring object.
Chiller may be close to a water
source or leak.
The door may be opened too often
or kept open too long.
Action
Connect the plug to the
power supply
Call Husky (see back page)
or a qualified engineer.
Replace the fuse with one of
the same rating.
Call Husky (see back page)
or a qualified engineer.
Check the controller and
adjust the set temperature.
Call Husky (see back page)
or a qualified engineer.
Clean using a vacuum cleaner
and soft brush attachment
(see page 8)
Check the unit is level and
the seals are not damaged.
Move the chiller to a better
location and check it is out of
direct sunlight.
Move the chiller to improve
free movement of air.
Check location and position
using a spirit level.
Relocate the chiller or the
object.
Dry surfaces thoroughly and
move the chiller.
Try to minimise opening of
the doors for better cooling
performance.
UK PRO upright manual 2016 EDITION 2.indd 5
22/12/2015 08:57
