THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this level. We
strive to continually create quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for choosing Husky!
Warranty
If, within one year from date of purchase, this HUSKY® product fails due to a defect in materials or
workmanship, please call the HUSKY® Service Center at 1-888-HD-HUSKY. Please keep a copy of the
original Home Depot receipt for all warranty claims. This warranty excludes incidental/consequential
damages and failures due to misuse, abuse, or normal wear and tear. This warranty gives you specific
rights, and you may also have other rights, which vary from state to state. Please visit the store or call
1-888-HD-HUSKY for details.
This warranty is in lieu of all other warranties expressed or implied.
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
USE AND CARE GUIDE
10 IN DIGITAL LEVEL
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Item # 934 631
Safety Information
PLEASE READ AND SAVE THESE INSTRUCTIONS
CAUTION:
Read, understand, and follow
all safety rules and instructions before using
this tool. These safety instructions should be
followed at all times. Failing to follow these
safety instructions could result in injury to
yourself or others. Also, failing to read and
follow these instructions may cause damage to
your equipment.
WARNING:
BE SURE TO read and understand
all instructions. Failing to follow all instructions
listed below may result in electric shock, fire,
and/or serious personal injury.
WARNING:
This battery-operated tool uses
only “AAA” batteries. Using any other batteries
may create a risk of fire.
WARNING:
Carefully follow all instructions
and warnings on the battery label and package.
WARNING:
Remove dead batteries
immediately and dispose of them according to
your local ordinance.
WARNING:
Always insert the batteries
correctly. The polarity (+ and -) is marked on
the batteries and on the tool. DO NOT:
Short the battery terminals.
Charge the batteries.
Mix old and new batteries. If either or
both of the batteries are weak, replace
both of them with two new batteries.
These new batteries should match each
other in brand and type.
Dispose of batteries in a fire.
WARNING:
Keep batteries out of the reach
of children.
WARNING:
Remove batteries if the device
will not be used for several days.
WARNING:
Use only accessories that are
recommended by the manufacturer for your
model. Accessories that may be suitable for
one tool may become hazardous when used on
another tool.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
NOTICE:
This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect
the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
Pre-Operation (continued)
3.
– Use to convert angles to different units. Push to change the display units from degrees (°) to pitch
(in/ft) to slope (%). Pitch readings are in 1/8 in/ft increments. Plus and minus signs indicate that the pitch is
slightly more (+) or slightly less (–) than the pitch shown on the display.
4. Reset
– Absolute/Relative Angle Conversion button. When the level is turned on, it will be on absolute angle
mode. To change to relative angle, press the Reset button. If you want to use the absolute angle again, turn off
the level and power it on again.
5. LCD Display
– The display reads normally when the level is upside down. Once you turn on the tool, the first
display is the temperature (in Fahrenheit). After about two seconds, it will automatically display the absolute
angle in degrees.
6. Working Base
– When you lay your digital toolbox level on a flat surface, ensure that its working base is placed
firmly on the working surface.
7. Vial
– When using the Digital Level to check level or plumb of the working surface, you can measure the surface
by observing whether the bubble of the vial is in the center. You can use this function without batteries.
8. Battery Compartment
– Holds two AAA batteries.
9. Hanging Hole
– Hang the tool here for storage purposes.
SCREEN ICONS
Up/Down Indicator
– Zero Line (0°) always indicates the level
position. The bias and the right arrow indicate up or down, away
from the level (0°).
Battery Capacity Icon
– Indicates the power remaining in
the batteries. Replace batteries if the black power bar has
disappeared.
Beeper Icon
– When the beeper function is active, this icon will
appear on the screen.
Hold Icon
– When the display reading is frozen, the “H” will blink.
Operation
CHANGING THE DISPLAY UNITS
1. Press the
button to convert the
measurement units between degrees (°),
pitch (in/ft), and slope (%). Figure 2 shows
an example of the LCD display showing a
degree measurement.
2. Press the
Hold
button to capture the
temporary reading.
Figure 2
3. Press the
button to shift to in./
Ft unit. Figures 3 and 4 show the pitch
H=67/8 inch (H=L*tan
α
, L=1feet,
α
=
30.0°).
Figure 3
Figure 4
H = L * tan
α
α
L
H
4. Press the
button again to get the slope
of the surface H=57.7cm (H=L*tan
α
, L=100 cm,
α
=30.0°), as shown in Figures 5 and 6.
Figure 5
Figure 6
H = L * tan
α
α
L
H
Operation (continued)
If the angle is greater than 45° but less than 90°,
the slope of the surface is H=L / tan
α
(see Figure 7).
Figure 7
(45˚ <
α
< 90˚)
α
H = L / tan
α
L
H
ABSOLUTE ANGLE MEASUREMENT
1. Lay the digital level on a surface, ensuring the base sits flat against the surface. The level has two magnets
in the bottom to secure it to steel surfaces. If necessary, you can turn the digital level upside down during
measuring. The display will continue to read normally.
2. Once you turn the level on, the display figure indicates the absolute angle between the level and the working
surface.
3. While the angle changes, the bias on the display shows the tilt trend of the tool while the right arrow points
upward or downward.
4. To activate the beeper, push the
On/ /Off
button. To deactivate, push it one more time.
5. To change the display units for the measured angle, see the Changing the Display Units in the Operation section.
RELATIVE ANGLE MEASUREMENT
1. Lay the digital level on the surface.
2. Push the
Reset
button. The display reads 0.0°, while its top left corner shows the zero line. Move it to another
working surface, and the relative angle between the two working surfaces will be displayed.
3. To change the display units for the measured angle, see Changing the Display Units in the Operation section.
4. To return to absolute angle measurement, turn off the level and power it on again.
Maintenance
This digital level has been designed to be a low maintenance tool. However, in order to maintain its
performance, you must always follow these simple directions. Careful use and maintenance will extend
the digital level’s useful life and prolong its accuracy.
□
If the level is splashed with mortar or other construction site residue, simply wipe clean with a
damp cloth. DO NOT immerse the level in water.
□
Aluminum surfaces can be cleaned with a non–abrasive cleaning powder.
□
Store the level away from extreme temperatures below 20° F (–6° C) or higher than 140° F (60° C).
□
Your level is a precision instrument and requires reasonable care and handling. If the level has
been dropped or severely jarred, it can seriously affect the precision of the level.
□
When the black power bar inside the battery icon disappears, turn the unit off and change the
batteries.
Troubleshooting
Problem
Solution
The display does not light when the
On/Off button is pushed.
Open the battery compartment, and check to ensure that batteries
are inserted correctly.
Check the battery capacity. Replace the batteries if necessary.
The LCD display is damaged. Contact our service department for
professional help.
Pre-Operation
PRODUCT APPLICATIONS
You can use this digital level for the following applications:
Gradient, level, vertical measuring, and checking of floor, wall, ceiling in construction, decoration.
Measuring, checking and maintenance in irrigation works, construction of bridges and roadways,
manufacture of machines or parts, industry flat base, and others.
Locating antenna, communication equipment, and other fixtures.
TECHNICAL SPECIFICATIONS
Power Supply
2 “AAA” 1.5-Volt Batteries (not included)
Measuring Range
0-360°
Optimum Operating Temperature
32° F to 104° F (0° C to 40° C)
Accuracy of Vials
±0.029° (level or plumb)
Accuracy of Digital Display
±0.1° (level or plumb), ±0.2° (all angles)
Estimated Battery Life
12 hours with alkaline batteries
DIGITAL LEVEL FEATURES
This digital level is a manual-leveling tool that can be used inside and outside for horizontal (level),
vertical (plumb), and square alignment projects. It comes fully assembled (Batteries are not included).
Please read and understand all instructions in this instruction manual before using the product.
Figure 1 and the list that follows describe the features of this level.
1
7
7
8
5
Figure 1
6 2
4
9
9
3
1. On/
/Off
– Press and hold this button for two seconds to turn the level on. Turn the level off by pressing and
holding the button for about two seconds. The level will automatically shut off if left idle for five minutes. When
the level is turned on, push the button to activate and deactivate the beeper. The beeper will sound at level, 45°
angle, plumb and the last hold angle in the memory.
2. Hold
– Push to “freeze” and “unfreeze” the display reading. It can also keep a record of the last reading.
1
