6
Operation
1
Operating the impact wrench
□
This 1/2 in . Impact Wrench is designed to operate on
90 PSIG . Lower pressure (below 90 PSIG) will reduce
performance of the tool . Higher air pressure (over 90
PSIG) raises the performance of the tool beyond its rated
capacity and could cause serious damage to the tool and
the user .
2
Changing the output torque direction
□
This tool features the reverse switch to change the
output torque direction to tighten (assemble) or loosen
(disassemble) the bolt or fastener .
□
Control the output torque direction by turning the reverse
switch button to the Forward arrow or Reverse arrow
position to change the direction .
3
Changing the output torque level
□
This tool features the air regulator to manage the output
power located on the back of the housing .
□
Turn the knob to adjust to your desired torque level .
□
The left setting is the lowest power level, the center setting
is a medium power level, adn the right setting is the
highest power level .
4
Installing and removing the impact
sockets
WARNING:
Disconnect the tool from the air supply before
servicing or changing accessories . Always use sockets rated
for impact wrenches .
To install the impact socket:
□
Disconnect the tool from the air source .
□
Select the suitable and desirable socket size .
□
Press fit the anvil into the socket .
□
To remove the impact socket:
□
Disconnect the tool from the air source .
□
Use your hand or a suitable tool to remove the socket .
Forward
