8
Assembly (continued)
7
INSTALL THE SHELF
E
CC
Insert four shelf brackets (CC) into the slots on the side panels at the desired height. Make sure the four brackets (CC) are at
the same height. Place the shelf (E) over the shelf brackets (CC), and push it down onto the shelf brackets. Make sure the
shelf (E) is properly and safely locked by the upright hooks of the shelf brackets.
Shelf locked by shelf bracket
after installation
□
CC
Slots on the inner back side
of side panel
Slots on the inner front
side of side panel
The M6 x 40 hex tapping bolts (BB) should be drilled into
the stud of the wall.
Maintenance
Check all the screws and nuts periodically for tightness. Tighten them when necessary.
□
CONNECT THE CABINET TO THE WALL
8
Open the doors and fasten the cabinet to the wall with
two M6 x 40 hex tapping bolts (BB).
□
WALL
BB
BB
Slots on the inner front
side of side panel
CC
Slots on the inner
back side of side
panel
BB
WALL
1
