Assembly
(continued)
Mounting
the Pegboard panels
1. On a flat level surface, align the long sides of the top panel (A)
screwdriver, tighten the three M6 screws (AA) to connect the
Locate the studs inside the wall where you wish to place the
8
B.
Place the attached pegboard panels on the wall in the desired
directly to a wall
and bottom panel (B) together and using a Phillips-head
panels together.
2.
pegboard and mark them.
3.
B
A
location and locate the peg holes over the marked studs on the
wall. Ensure the pegboard is level, then using a minimum 2.5 in.
long screw and 1/2 in. washer, secure the pegboard panels into
wall studs in all four corners at minimum.
NOTE
:
Hardware
is not included to secure pegboard
□
This steel product has been coated with industrial powder coating
Care
and
Cleaning
®
surface. Use a glass cleaner ( Windex or equivalent product) to
for a durable finish. To help protect this finish, do not allow harsh
chemicals such as oil or grease to remain on the powder coating
clean and maintain all powder coated surfaces.
panels to a wall.
Operation
The peg holes will accommodate all standard size 1/8 in. and 1/4 in.
peg hooks.
AA
