HUSKY LINERS 6377, Care And Use Instructions

Page: 1 / 2

6377.doc
12/28/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work well.
Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD EXPLORER
SECOND SEAT FLOOR LINER
LEFT OR
DRIVER’S SIDE
RIGHT OR
PASSENGER’S SIDE
FRONT OF VEHICLE
NOTE: PASSENGER’S SIDE
LINER OVERLAPS DRIVER’S
SIDE LINER
NOTE: TO ACHIEVE THE CORRECT FIT FOR EXPLORERS EQUIPPED WITH SECOND ROW
BUCKET SEATS/SECOND ROW CONSOLE, SIMPLY TRIM AWAY THE MATERIAL FROM THE
LOWER PORTION OF THE LINER THAT COVERS THE CENTER HUMP (SEE HATCHED AREA
ABOVE). USE THE MOLDED IN TRIM GROOVE AS A GUIDE. A UTILITY KNIFE OR HEAVY
SHEARS WORK WELL FOR TRIMMING. SEE PHOTOS ON BACK SIDE OF PAGE.