47952.doc
09/11/2006
Note 1-Detent Pin Removal
Note #2-Position Handle So Cam Latch will
be pointing up when handle is horizontal.
Note #1-Removing Detent Pin
Cam Latch
Detent Pin
Note #3- 3/8 X 3_”
Bolt through
Channel Iron with
Nut Plate attached.
Note #4-4” Strap shown positioned under
end of Channel Iron. 8” Strap used under
box rail in Suburban only
4” Strap
Retention
Block
Note 5-Retention Block shown installed. Take
care to center liner before installing block.
8” Strap
Note #6 – Remove Hinge Stop Lever to
allow placement of Storage Box
Note 7-4” Extrusion Plate shown installed.
Note 8-Positioning of Nut Plate
Nut
Plate
