www.spartacogroup.com
800-860-6170
6
SPECIFICATIONS
REC-CN658
Specifications
Output
6 Ton
Weight
10.7 lbs. with Battery
Size
16”L x 10”H x 3.1”W
Jaw Opening
.95”
Crimping Estimates
BP-84
#6 Cu/Al
250
1/0 Cu/Al
190
4/0 Cu/Al
150
Connector Range
Lugs and Splices
#8-500 MCM Cu
#8-300 MCM Al
H-Taps
Up to 4/0-4/0
Features
• Open C-Head Design
• Rapid Advance
• One Hand Operation
• Tested Up to 75kV
• Rotational Head
• Bright White, LED Lights for Working in Low
Light Conditions
• Ergonomically Designed for Balance and Grip
• Weather Resistant Housing
• Audible Bypass when Predetermined Pressure
is Achieved
• 5 Year Warranty on Tool, Battery & Charger
The
REC-CN658
is an open jaw version of the REC-658U latched type tool. The open jaw can easily fit into tight
situations where the closing of a jaw latch would be a problem. The jaw is covered with a rubber boot designed to
provide some insulated protection against “brush” contact with energized cables. The tool should not be used as an
insulated tool since the dies and die holding pins are always exposed.
