Please read this instruction sheet completely before starting work. Laying out the fence is an
important first step toward a quality installation.
NOTE: Ranch Rail fences are designed for level terrain. For Significant slopes in the terrain you
will need to modify some of the posts and rails. Filing out the routed holes in the posts and cut-
ting the rails in half will help with assembly on un-even terrain.
STEP 1
Locate the boundary lines to your property.
STEP 2
Drive stakes into the ground along the
property line and stetch a string between
each stake. We recommend that all posts
be set approximately 4”- 6” inside of the
property line to make sure that the
concrete footings do not go over your
property line.
STEP 3
Mark the location of each post hole.
Ranch Rail fence hole locations should
be 96-1/2” on center. A can
of bright colored spray paint or colored
flags work well to mark out holes.
2
1
PREPARE FENCE LAYOUT
Corner Post
String
Line Post
Gate Post
Gate Post
Line Post
Corner Post
HUSKER VINYL
R
anch
R
ail
F
ence
& G
ate
Installation Instructions
