background image

3

Operator's Manual

26750TSC Compact Tiller

For additional information email 

[email protected]

 or call 800-345-6007 M-F 8-5

Intended Use / Foreseeable misuse

ImPORTaNT: 

 This is a motorized rotary tiller that works the 

soil by means of rotating tines.  It is pedestrian-controlled, but 

not self-propelled, with a gasoline-fueled internal combustion 

engine to power the tines.  It shall not be used for any other 

purpose.

WaRNINGS aND SaFETY PRECaUTIONS

OPERaTOR'S RESPONSIBIlITY

Accurate assembly and safe and effective use of the machine is 

the operator's responsibility.

•  Read and follow all safety instructions.
•  Carefully follow all assembly instructions.
•  Maintain the machine according to directions and schedule 

included in this HUSKEE operator’s manual.

•  Ensure that anyone who uses the machine is familiar with all 

controls and safety precautions.

SPECIal SaFETY mESSaGES

Your manual contains special messages to bring attention to 

potential safety concerns, machine damage as well as helpful 

operating and servicing information. Please read all the infor-

mation carefully to avoid injury and machine damage.

NOTE: General information is given throughout the manual 

that may help the operator in the operation or service of the 

machine.

 

This symbol points out important safety instruc-

tions which if not followed could endanger your 

personal safety. Read and follow all instructions 

in this manual before attempting to operate this 

equipment.

BEFORE OPERaTING ENGINE:

Please read this section carefully.

 Read entire operating and 

maintenance instructions AND the instructions in the engine 

manual that accompanies this product (if applicable).  Failure 

to follow instructions could result in serious injury or death.   

Operate the machine according to the safety instructions 

outlined here and inserted throughout the text.  Anyone who 

uses this machine must read the instructions and be familiar 

with the controls.

 

WaRNING

WaRNING INDICaTES a HaZaRD WHICH, IF NOT 

aVOIDED, COUlD RESUlT IN DEaTH OR SERIOUS IN-

JURY aND/OR PROPERTY DamaGE.

 CaUTION

CaUTION INDICaTES YOU CaN BE HURT OR YOUR 

EQUIPmENT DamaGED IF THE SaFETY INSTRUC-

TIONS THaT FOllOW THIS SIGNal WORD aRE NOT 

OBEYED.

 ImPORTaNT

INDICaTES HElPFUl INFORmaTION FOR PROPER aS-

SEmBlY, OPERaTION, OR maINTENaNCE OF YOUR 

EQUIPmENT.

 WaRNING

CalIFORNIa PROPOSITION 65 WaRNING
ENGINE ExHaUST FROm THIS PRODUCT CONTaINS 

CHEmICalS KNOWN TO THE STaTE OF CalIFORNIa 

TO CaUSE CaNCER, BIRTH DEFECTS, OR OTHER RE-

PRODUCTIVE HaRm.

 WaRNING

YOU mUST REaD, UNDERSTaND aND COmPlY WITH 

all SaFETY aND OPERaTING INSTRUCTIONS IN 

THIS maNUal BEFORE aTTEmPTING TO SETUP aND 

OPERaTE YOUR maCHINE.
FaIlURE TO COmPlY WITH all SaFETY aND 

OPERaTING INSTRUCTIONS CaN RESUlT IN lOSS OF 

maCHINE CONTROl, SERIOUS PERSONal INJURY TO 

YOU aND/OR BYSTaNDERS, aND RISK OF EQUIPmENT 

aND PROPERTY DamaGE. THE TRIaNGlE IN THE TExT 

SIGNIFIES ImPORTaNT CaUTIONS OR WaRNINGS 

WHICH mUST BE FOllOWED.

 

DaNGER

WaRNING INDICaTES a HaZaRD WHICH, IF NOT 

aVOIDED, WIll RESUlT IN DEaTH OR SERIOUS INJURY 

aND/OR PROPERTY DamaGE.

 

DaNGER

SRT

CRT

Summary of Contents for 26750TSC

























Reviews: