www.PyleUSA.com
8
Seat and drawer installation
(Method 2-2)
Sliding Sleeve Installation
Insert the front covering into
seat housing and use the
Allen key to fix firmly with
the screw.
Put the complete Seat
into Steering Rod.
Done as image shown
Press down the seat, finish
as shown in Figure above.
Put the drawer into the
seat
Put T-bar into the Steering
Rod and Fix the collar clamp,
Finish as image shown
Put the sliding sleeve
into Steering rod.
Tighten the screws with
the Allen key
PutT-bar into the Steering Rod and Fix the
collar clamp. Finish as image shown.
