www.PyleUSA.com
7
Seat and drawer installation
(Method 1) RECOMMENDED
Seat and drawer installation
(Method 2-1)
Remove and install collar clamp and T-Bar
Put seat housing into
the steering rod.
Insert the front covering into
seat housing.
Use the Allen key to
fix firmly with the screw.
Done as image shown
A
B
C
Open the lever of the collar
clamp and use the Allen key
to loosen the screw, as shown
in Figure A
Loosen the screw with
Allen key, as shown in
Figure B.
Press the button and
pull up theT-Bar.
Remove the collar clamp.
Finish as shown in Figure B
If installing T-bar and collar
clamp, go back from E to A
D
E
F
