3
5
To operate the quick disconnect
couplings, align the slot in the sleeve
with the pin. Slide the sleeve back to
connect or disconnect the coupling.
After connecting the coupling, rotate
the sleeve ¼ to ½ turn to lock the
coupling.
Connect the hoses from the power unit
to the 15 inch hoses on the Ram as
shown.
Start the power unit and move the
operating lever on the power unit by-
pass valve to the
PRESSURE
position.
Operate the Ram by twisting the
actuator handle counter clockwise to
extend the Ram and clockwise to
retract. If the Ram does not operate
correctly, make sure the quick
disconnects are properly connected
per steps 2 and 3 above. If needed,
refer to the troubleshooting section of
this manual.
4
3
