Technical Support (707) 544-4761
6
www.HURST-SHIFTERS.com
18. Once the center bearing bolts have been removed,
you can pull the driveshaft back and lower the front
end of the driveshaft. Allow the driveshaft to rest on
top of the exhaust.
19. Remove the two (2) 10mm hex nuts that mount the
rear of the shifter to the transmission tunnel.
Tools: 10mm Deep Socket, Universal Adapter,
Extension(s), 1/4” Drive Ratchet
20. Remove the bolt attaching the shifter housing to
the transmission.
Tools: a 10mm ratchet wrench makes for ease of
removal.
Remove the bolt from the side of the transmission.
You may have to pull down on the transmission to
allow the screw to clear the tunnel.
21. Remove the shift linkage bolt.
Tools: 13mm Socket, 3/8” Drive Ratchet
