Technical Support (707) 544-4761
12
www.HURST-SHIFTERS.com
41. Align the reverse lockout block to the threaded
hole on the larger portion of the Indy shifter. Use the
retaining screw that was removed in step 9 to secure
the reverse lockout into position.
Note:
The retaining screw should tighten down to the
Indy stick while allowing the reverse lockout to freely
move up and down.
43. Compress the spring enough to install two of the
provided set screws. Install the set screws evenly
tightening them against each other.
44. Reinstall the O-ring and plastic ring
that were removed in step 7.
42. Reinstall the factory spring that was removed in
step 8.
