8
9
Hopper
Strainer
Chamber
Spinning brush
align the chamber arrow [ ] with hopper arrow
[ oPEn] and turn the hopper clockwise until it
clicks so that the hopper arrow [ CloSE] aligned
with chamber arrow[ ].
OPEN
SLOW JUICER ASSEMbLY
Place the chamber on the base.
make sure to press the auger down into the strainer in
STEP 2. The hopper does not close properly when the
auger does not fit in completely.
4
3
2
1
assemble the parts in the following order:
Chamber>Spinning brush> Strainer. make sure
chamber arrow [ ] aligns with strainer arrow [ ].
SLOW JUICER ASSEMbLY IN DETAIL
Firmly insert the extraction seal located at the bottom of the chamber into the pulp outlet.
Make sure the outer groove of the chamber is completely aligned with the base ridge.
1
Assemble the parts in the order of chamber> spinning brush> strainer> auger> hopper (or assemble the spinning brush into the chamber then fit
strainer ridge in the chamber inner groove). Make sure all the arrows of chamber [ ], strainer [ ] and hopper [ OPEN ] are aligned in a vertical line.
2,3
chamber outer groove
base ridge
strainer
ridge
boTTom
of THE
STRaInER
InSIdE
THE
CHambER
chamber
inner
groove
extraction
seal
Hopper
rear arrow
The spinning brush can be assembled regardless
of the direction.
Align the hopper arrow with the base arrow located at the rear of the appliance.
The hopper will not close if the parts are assembled incorrectly.
4
auger
STEP
STEP
STEP
STEP
