hopper
Strainer
chamber
Spinning brush
www.hurom.com I
09
SLOW JUICER ASSEMbLY IN DETAIL
Insert extraction seal at the bottom of the chamber hard enough into the pulp outlet.
Make sure chamber outer groove aligns with base ridge completely.
1
chamber outer groove
base ridge
strainer
ridge
boTTom
oF THe
STrainer
inSide
THe CHamber
chamber inner
groove
extraction
seal
Hopper
rear arrow
Align the base arrow with the hopper arrow at the rear of the appliance completely.
The hopper does not close properly when the parts are not assembled correctly.
4
auger
Assemble the parts in the order of chamber> spinning brush> strainer> squeezing auger> hopper (or assemble the spinning brush into the
chamber then fit strainer ridge in the chamber inner groove). Make sure all the arrows of chamber [ ], strainer [ ] and hopper [ OPEN ]
are aligned in a vertical line.
2,3
HG-2 4PJ12249_V.01.indd 11
2013-08-14 오후 1:50:19