04
정회전
역회전
정지상태
작동스위치
정회전
역회전
off(정지)
정지
Before operating the product,
press the power switch.
※
If you have an allergy, make sure to select
proper ingredients for your body when
preparing the ingredients.
※
For the method of and notes on using the
device for each ingredient, please refer to the
recipe book.
※
Prepare ingredients in sizes able to be
inserted into the hopper. If you want to juice
a large volume or perform fast juicing, cut
the ingredients into smaller pieces before
inserting them. For about 1 kg, repeat the
"disassemble and clean after juicing" step for
use.
※
Do not insert ingredients into the hopper
above the guided limit mark.
※
When juicing soft fruits, the juice of the
ingredients may stagnate inside the chamber.
※
When juicing fibrous fruits and vegetables,
the juice may thicken.
※
Inserting the following ingredients, which
are impossible to be juiced, may lead to
damage or malfunction.
- Ingredients that cannot be juiced such as
sesame seeds, coffee beans, Chinese peppers,
tree barks and pine needles, as well as mudfish,
eels, shrimp, marsh snails, squids, etc.
- Fruits soaked in alcohol, honey or sugar
(grapes, raspberries, mulberries, etc.) and
enzymes (glasswort, rock pine enzymes, etc.)
- Ingredients whose attributes make them
difficult to be juiced such as silverberries, aloe,
cactus, quince, bananas, yams, kudzu root,
sugar cane, acorns and dandelions
- Boiled ingredients such as boiled potatoes and
sweet potatoes
- Ice made by freezing water
※
Do not use it for pulverizing grains.
※
Refer to the instructions in
<Precautions During Operation> (refer to p. 3).
Operate / WHITE LED blinks
- It works when the power switch is briefly pressed in
the Standby Mode.
- It is used when activating the product for juicing.
- During operation, the white lamp blinks.
- If the hopper cover is opened during operation, the
product stops and the white lamp is lit. If the hopper
cover is closed again within 60 seconds, the operation
continues. But, if 60 seconds elapse, the operation
automatically stops and it switches to the Standby (stop)
state.
Stop / WHITE LED on
- This is used to stop the product's operation.
- The product stops when the power switch is briefly
pressed in the operation state.
- When stopped, the white lamp is lit.
※
If the hopper cover is open or the chamber set is
not assembled, the white lamp is turned off.
※
When 1 minute has elapsed from the Standby (stop)
state, the product enters the power saving mode
(light turned off). If the power switch is pressed or the
chamber set is assembled, the power saving mode is
deactivated and it switches to the Standby (stop) state.
Reverse rotation / ORANGE LED blinks
- This is used when the operation pauses or a reverse
rotation is needed due to excessive insertion of
ingredients during extraction.
- During a reverse rotation, the orange lamp blinks.
※
It works only when the power switch is pressed
for over 1 second, and it stops when the switch is
released.
※
If the Multi-screw stops during operation, the
product automatically rotates in reverse but, if the
power is unstable, the reverse rotation may not work.
In such a case, press the power switch for over 1
second to activate a reverse rotation and then press
the power switch again briefly to activate.
4. Precautions Before Juicing
3. Power Switch Guide