09
En
glis
h
01
01
02
02
정회전
역회전
정지상태
작동스위치
정회전
역회전
off(정지)
정지
정회전
역회전
정지상태
작동스위치
정회전
역회전
off(정지)
정지
01
Open the hopper cover.
①
Press the lever of the hopper cover to open it.
Insertion of an excessive amount of ingredients may
damage the product.
02
Add ingredients only up to the limit mark of the
hopper.
①
For soft ingredients, mixing them with other ingredients
for extraction.
03
Close the hopper cover and keep the juice cap open.
①
Before pressing the power switch, place the juice
container and pulp container first.
②
The juice may flow backwards into the hopper if the juice
cap is closed during extraction. If the juice does not come
out even after opening the juice cap, open the hopper cover
and empty out the contents.
③
When the hopper cover is closed, the white lamp is lit.
04
Press the power switch briefly to start operation.
①
The "click" sound during the operation of the product is
the sound of the chamber set and the motor being locked
together.
②
During operation, the white lamp blinks on the power
switch part.
③
If the Multi-screw stops during operation, the product
automatically rotates in reverse but, if the power is
unstable, the reverse rotation may not work. In such a case,
press the power switch for over 1 second to activate the
reverse rotation and then press the power switch again
briefly to activate.
④
A timer, which automatically stops after about 5 minutes
from the start of operation, is set. If the power switch is
controlled during operation or the hopper cover is opened
and then closed, which pauses and then restarts the
machine, the timer is reset to 5 minutes again.
05
To add more ingredients during operation, use the
additional inlet or open the hopper cover.
①
When the hopper cover is opened, the operation stops.
②
Do not use anything other than the designated pusher.
③
In case the Multi-screw spins but the ingredients fail to
be ground in the hopper during extraction, use the pusher
to press the ingredients down.
06
Empty out the pulp container and juice container so
that they are not filled up.
07
Let the machine operate for about 1 more minute after
all ingredients go down in the hopper.
①
It slowly presses and squeezes the ingredients so it
takes some time until the last ingredient is juiced.
②
Removing the remaining pulp by additionally operating
the machine after extraction makes it more convenient to
detach the hopper and clean the parts.
08
Once the juicing and pulp removal are finished, press
the power switch to stop the machine.
①
The machine stops 3 seconds after it is stopped by the
power switch.
09
Pour any remaining juice by tilting the chamber
forward.
①
For thickly concentrated juice made of tomatoes, etc., the
juice may still remain in the chamber.
01
If the Multi-screw stops during operation, the
product automatically rotates in reverse and then
goes into a normal operation. But, if the power
is unstable, the reverse rotation may not work.
In such a case, press the power switch for over 1
second to activate a reverse rotation.
The reverse
rotation is a function that returns the ingredients
upward. It only works while the power switch is
pressed and, once you lift your finger from the switch,
the Multi-screw stops rotating.
02
After the Multi-screw is completely stopped after
a reverse rotation, press the power switch briefly
to start the operation again.
When operating the
extraction or reverse rotation function, make sure
to press the power switch after the Multi-screw has
completely stopped moving.
Note
If the machine does not work even after following the
above steps, pull the power cord plug from the outlet,
detach the chamber set, wash it and use it again. Due
to its characteristics, the motor will not stop at once
but, instead, continue to spin slowly in the direction of
operation before coming to a complete stop.
8. When Multi-screw Stops
During Use