H120 –H150 Hot Water Boilers
page 3
1.0
INTRODUCTION
Congratulations on your purchase of a Hurlcon H120 - H150 Series Hot Water Boiler. Correct
installation and service of your new heating system and correct chemical maintenance of the water
will ensure years of service. The H120 - H150 Series Boiler is a compact lightweight and efficient
gas fired hot water boiler. It is equipped with features that take advantage of new technology
developed exclusively by Hurlcon.
The Hurlcon Boiler is a floor mounted atmospheric boiler with a built in balanced flue for outdoor
installation. The power output is controlled by an integrated electronic controller to maintain the set
point water temperature over a wide load range. In addition, the Hurlcon Boiler is equipped with
electronic ignition. The electronic display tells at a glance the operational status of the boiler.
1.1 NOTICE TO INSTALLERS
This is a Floor Mounted - External – Hot Water Boiler
For use with Natural Gas or LP Gas as per the attached data label.
The information below is given to assist the installer with the installation of this range of H120 –
H150 Boilers. Please read it carefully in order to make the installation as easy as possible and to
ensure the system works well and conforms to the necessary government regulations.
PLEASE READ THESE INSTRUCTIONS BEFORE STARTING THE INSTALLATION.
It is important that this boiler is installed and serviced as detailed in these instructions by an
AUTHORISED person.
This boiler is to be installed and serviced to the requirements of the
Local Building, Gas, Water and Electricity Authorities.
These instructions are to be held by the owner / user after installation.
This boiler must not be used as a SPA or POOL Heater
This appliance must be installed in accordance with the installation instructions, local gas fitting
regulations, the AGA Installation Code AG 601 and any other relevant statutory authorities.
Refer to data plate for details of gas type, gas consumption and burner pressure.
