14
14
14
14
14
SATAII 2
_
SATAII 1
_
Step 4. Install the cold-swap bay. Gentally push half way of the
cold swap bay into the HDD cage. Connect the SATA cable
to the SATA II_2 connector(see P.11 No. 2) and connect the
power connector from the ATX power supply on one side of
the HDD cage. See Figure 12.
Step 5. Install the SSD bracket by place the bracket on the top of
HDD cage and secure the hooks. Connect the SATA cable
to the SATA II_1 connector(see P.11 No. 3) and connect the
power connector from the ATX power supply on another
side of the HDD cage. Now, push the cold-swap bay all the
way into the HDD cage. Fasten seven screws to secure the
cold-swap and two screws to secure the SSD bracket to the
HDD cage. See Figure 12.
Figure 12. Cold-Swap, SSD bracket installation
Step 4
Step 5
