Huntleigh SonicaidTeam, Operator'S Manual, Page: 77 / 113

Sonicaid Team Operator’s Manual
77
7.3 Using the analysis
Starting the analysis
1 Set up Team as you would to record a normal trace.
2 Press the printer button once to start the printer. This starts the analysis as well.
Stopping the analysis
To stop the printer, press [PRINTER], then [HALT].
If you press [PRINTER] by accident, press [CONTINUE] to resume.
Turning the analysis off
To record a trace without the analysis:
1 Press [MENU] once.
2 Select [TURN ANALYSIS OFF].
3 When done, press [EXIT].
4 Press the printer button to start recording.
Turning the analysis on
To turn the analysis on again:
1 Press [MENU] once.
2 Select [TURN ANALYSIS ON].
3 When done, press [EXIT].
Deceleration size parameter
The default is for deceleration size results not to be printed or displayed.
To print and display the deceleration size:
1 Press [MENU] three times.
2 Select [TURN DECEL ON].
3 When done, press [EXIT].