Fig1 Overview camera functions
1. 2 Start button and functions.
OFF
: Off (Please remove the batteries when the camera is not in use);
SETUP
: Setting mode of the camera via the Menu. (Keep in mind that all settings are then changed
according to what is selected in the APP)
ON
: Active mode (The monitor shuts down, the camera switch to ACTIVE).
Buttons:
MENU
: Enter the menu
▲▼◄
►
: Navigation buttons (Move Up/Down/Page in Menu)
OK
: Confirm your selection in the menu / display pictures/movies in the camera screen.
►
: Press to manually take a photo or movie. (Click again to stop video.).
2
Preparation
2.1 Installation of the batteries
This camera can be powered by 12AA batteries or 6V-12V external power. Pay attention to the (+) or
(-) molded into each sleeve to determine whether you insert the positive or negative end into the
sleeve first. Negative battery pole always comes in contact with the spring.
Note:
· Never mix different types of batteries
· Do not mix old and new batteries
· We recommend high-performance lithium batteries.
· Always remove the batteries when not in use to prevent leakage!
2.2 Install the SD card
To activate the camera, you need to install an SD card in the slot at the bottom right corner of the
camera.
SD card up to 256 GB can be used, minimum Class 10, loading speed 80MB/S.
Enter the MENU >SYS >Format SD and format the SD card before use.
Summary of Contents for Wolf 30MP 4K 4G LTE Cloud
Page 1: ...WOLF 30MP 4G LTE Cloud...
