INSTALLATION
4
Mount the Installation Brackets — Inside Mount
Prepare the Installation Brackets
■
Use pliers or heavy duty scissors to remove the top
tabs on the installation brackets.
NOTE:
Save these tabs once removed. They may
be used as shims, if necessary.
Mount the Installation Brackets
■
Mark 2" to 3" from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location.
Allow a minimum
of 15" between the brackets on the motor end for the rechargeable battery
wand.
Mount into wood whenever possible.
NOTE:
Before the headrail is installed, the bracket levers need to be fully to the left, and
once the headrail is properly in place, levers automatically click to the right.
■
Center the brackets on your marks and mark the location of the screw holes.
➤
The minimum casement depth required for
installation brackets is 1" (1
1
⁄
4
" for standard shades
and 1
1
⁄
2
" for oversized shades with rechargeable
battery wand).
➤
The minimum casement depth required for a fully
recessed mount is 3
3
⁄
16
" for a standard bracket (4"
with rechargeable battery wand) or 3
3
⁄
4
" for an
XL bracket (4
1
⁄
4
" with rechargeable battery wand).
Shades that exceed 84" in width or length will
include XL hardware.
■
Use a level to check that the mounting surface is level. Shim the brackets, if necessary
(use the top tab that was removed from the brackets).
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
Tab
Remove Tab
Back Cover Bracket
Bracket Lever
Space Evenly
Space Evenly
2" to 3"
2" to 3"
Jamb
Jamb
2" to 3"
Casement
Depth
