manualshive.com logo in svg

HunterDouglas Luxaflex PowerView, Reference Manual

The HunterDouglas Luxaflex PowerView is a cutting-edge window treatment system that offers convenience and control at your fingertips. For detailed instructions on how to set up and use your PowerView system, download the free Reference Manual from our website. Experience the ease and sophistication of PowerView today.

Share
Download
background image

 

 

 

7. Additional actions

7.1. End limits reset (factory default)

This procedure will erase all limits stored in the volatile motor memory. It will not clear the Network ID and Group

assignments.

6.2.10

The new bottom limit is set!

Note

This procedure can be skipped for a fresh out of the box motor.

The motor will jog 2x when receiving any PowerView® command (e.g. Pressing the manual control button on the motor),

to con

fi

rm no limits are set.

MANUAL

Page 18 of 23

version: 1.0

Summary of Contents for Luxaflex PowerView
























Reviews:

No comments

Related manuals for Luxaflex PowerView

Velux ZOZ 213K Manual preview
ZOZ 213K
Brand: Velux Pages: 11
PENTAGON TranquilGuard Manual preview
TranquilGuard
Brand: PENTAGON Pages: 12
Graber Dura-Vue G-85 Manual preview
Dura-Vue G-85
Brand: Graber Pages: 38

Brands by name

Popular brands

Load more brands