a
b
click
2
1
click
click
2
1
c
8
1
2
3
4
5
6
9
10
7
14
12
13
11
REV 01 August`11
Place the clutch (with short chain) in the bracket 1
and slide it down until it clicks 2.
Fix the brackets with the screws provided.
a recess b wall c ceiling
Place the tube adapter on the clutch head of upper
roller blind. Press the bearing and lift the blind ...
... until it snaps into the bracket. If there is no leveller
option you can continue with installing of the lower
blind the same way as the upper blind.
Installation
Option: Leveller
Place the leveller on the bearing side in the brack-
et. Make sure that the opening for the Allen key is
pointing downwards. Turn the leveller until it clicks.
To adjust skewing, put the provided Allen key into
the screw of the leveller and turn it left or right to
move the blind up or down. Support lifting of large
heavy blinds with the palm of your hand.
Turn the upper clutch (with long chain) 30° and
place it in the bracket and slide it down until it clicks.
Place the chain from the upper clutch into the chain
outlet set. Fold the chain outlet set together until it
holes. Pay attention that L or R indicates inside.
Fix the chain outlet set with the screws provided.
