12
sent to the WVC. It will beep twice again indicating the
command was successfully received by the WVC.
To turn the WVC on:
1. While in the programming mode (upper part of the
LCD), press the
button until the current time and
day is displayed.
2. Squeeze the Transmit/Receive button once to move
to communication mode (lower part of LCD), use the
and
buttons to make sure the arrow is pointed
toward the WVC, then squeeze and hold the Transmit/
Receive button on the WVP. The WVP will beep twice
indicating that the “ON” command has been sent to the
WVC. It will beep twice again indicating the command
was successfully received by the WVC.
Tip:
Use the retrieve program function (see page 14)
to identify if WVC has been turned off in the field. After
retrieving the program, a controller that has been turned off
will display the system off icon on the WVP display.
Programmable Rain Off
This feature permits the user to stop all programmed
waterings for a designated period from 1 to 7 days. At the
end of the programmable rain off period, the controller will
resume normal automatic operation.
1. Press the
button until the
System Off icon and OFF is
displayed.
2. Press the
button and a 1
will be displayed. The 1 will
be blinking at this point.
3. Press the
button as many
times as needed to set the
number of days off desired (up to 7).
4. Press the
button once. The number of days off will
stop flashing.
5. Squeeze the Transmit/Receive button once to move to
communication mode.
6. Use the
and
buttons to make sure the arrow is
pointed towards the WVC indicating Transmit mode.
7. Squeeze and hold the Transmit/Receive button. The
WVP will beep twice indicating the command is being
sent to the WVC. It will beep twice again to indicate
that the WVC has received the command.
PROGRAMMING THE WVP (continued) ......................................................
