manualshive.com logo in svg

Hunter WVC, Owner'S Manual And Installation Instructions

Share
Download
Hunter WVC Owner'S Manual And Installation Instructions Download Page 15

fCC noTICe .......................................................................................................

This.notice.applies.only.to.models.WVC-100,.WVC-200,.and.WVC-400.

FCC ID: M3UWVC

This.equipment.has.been.tested.and.found.to.comply.with.the.limits.for.class.B.digital.device,.pursuant.to.part.15.of.the.

FCC.Rules..These.limits.are.designed.to.provide.reasonable.protection.against.harmful.interference.in.a.residential.instal-

lation..This.equipment.generates,.uses.and.can.radiate.radio.frequency.energy.and.if.not.installed.and.used.in.accordance.

with.the.instructions,.may.cause.harmful.interference.to.radio.communications..However,.there.is.no.guarantee.that.

interference.will.not.occur.in.a.particular.installation..If.this.equipment.does.cause.harmful.interference.to.radio.or.televi-

sion.reception,.which.can.be.determined.by.turning.the.equipment.off.and.on,.the.user.is.encouraged.to.try.to.correct.the.

interference.by.one.or.more.of.the.following.measures:

•. Reorient.or.relocate.the.receiving.antenna
•. Increase.the.separation.between.the.equipment.and.the.antenna
•. Consult.the.dealer.or.an.experienced.radio/TV.technician.for.help
The.user.is.cautioned.that.changes.and.modifications.made.to.the.equipment.without.the.approval.of.the.manufacturer.

could.void.the.user’s.authority.to.operate.this.equipment.

Summary of Contents for WVC

















Reviews:

No comments

Brands by name

Popular brands

Load more brands