Hunter SVC-100 Manual Download Page 15

Page: 15 / 40

Smart Valve Controller (SVC)

Selecting Interval Watering

With this option you can select interval

watering from 1 to 31 days.

1. With the cursor on day 7, press the

button until the

interval watering

icon and the two calendars appear on the

display.

2. Press the or button to select the

number of days between watering days (1

to 31). This is called the interval.

The controller will water the next Start

Time and will then water at the interval

programmed.

System Off

This function permits the user to shut the

system off for an indefinite period of time.

1. Press the mode button until the

Crossed Sprinkler icon is displayed.

2. Wait 4 seconds and “Off” will appear on

the display. The SVC is now in the System

Off mode and will remain off until it is

turned back on again.

To activate the controller from

the System Off mode:

1. Press the mode button once. The display

will wake up in the System Off mode.

2. Press the mode button again and

“Off” will disappear from the display.

Your controller is now on and will water

automatically based upon the current

program.

Programmable Rain Off

This feature permits the user to stop all

programmed waterings for a designated

period from 1 to 7 days. At the end of the

programmable rain off period, the controller

will resume normal automatic operation.

1. Press the button until the System

Off icon is displayed. Wait 4 seconds and

“OFF” will appear on the display.

2. Press the button and a 1 will be

displayed. The 1 will be blinking at this

point.

3. Press the button as many times as

needed to set the number of days off

desired (up to 7).

Manual Watering

To activate a Manual Watering:

1. Press the button once to display the

Current Time/Day icon.

2. Press and hold the button for two

seconds to display the Manual Watering

icon.

3. Use the or button to adjust the

manual water run time from 1 minute to 4

hours.

4. Release the buttons and the controller will

count down 10 seconds before activating

the manual cycle.

5. The flashing sprinkler icon will appear on

the display when watering is occurring.

To suspend Manual Watering:

1. Press the button until the

System

Off icon is displayed. Wait 4 seconds and

“OFF” will appear on the display.

2. Press the button again and the SVC will

water based upon the current program.

Summary of Contents for SVC-100









































Search results

Summary of Contents for SVC-100

Reviews:

Related manuals for SVC-100

Brands by name

Popular brands

Hunter SVC-100, Manual

Search results

Summary of Contents for SVC-100

Reviews:

Related manuals for SVC-100

Brands by name

Popular brands