®
10
11
Stake Mounting Method (Figure 3)
The universal mounting adapter can also be
used to stake mount the SVC.
1. Cut a section of 1⁄2" (13 mm) diameter
plastic pipe.
2. Drive the pipe into the ground inside the
valve box to the desired height of the
controller.
3. Slip the mounting adapter on top of the
pipe.
4. Attach the SVC to the mounting clip and
slide onto the adapter.
Figure 3
Connecting a Weather Sensor
A Hunter Rain-Clik™ rain sensor or
Mini-Clik
®
rain sensor can be connected to
the SVC. The purpose of this sensor is to stop
watering when weather conditions dictate.
NOTE: When the Rain Sensor is interrupting the
watering, the display will show the System Off
icon , “OFF” and
on the display.
To connect a weather sensor to the SVC:
1. Cut the yellow wire loop attached to the
SVC at approximately the middle of the
loop.
2. Remove approximately 1⁄2" (13 mm) of
insulation from each wire. Attach each wire
to each of the wires of the weather sensor.
You can mount the rain sensor up to 100'
from the SVC (18 gauge minumum wire
size).
3. Secure wire connections with waterproof
connectors.
Smart Valve Controller (SVC)
Battery Life Indicator
The battery life status icon is a quick way
to determine the remaining life of the installed
battery without having to remove the battery
from the controller. A battery life status icon
will appear along with the time and day on the
display. A fully charged battery will show all
three segment of the battery dark . As the
battery is expended, the segments will appear
as outlines .
Summary of Contents for SVC-100
Page 39: ......
