background image

T

his booklet is intended to be used when designing  
and installing single family residential sprinkler systems. It 
is set up in an easy-to-follow format with illustrations and 

helpful charts. 

If this is the first system you have installed, or if you have installed 
several systems but have never used this guide before, we 
recommend you look through the next few pages and become 
familiar with this presentation of the design and installation 
process.

You will notice we have included a sheet of graph paper for 
your convenience. There are detailed illustrations depicting 
suggested installation methods for sprinkler heads, pipe and 
valve manifolds, and how to connect the sprinkler main line into 
the house water supply or pump. Installation tips have also been 
placed throughout the guide to assist you in planning a system. A 
Glossary of Terms is included and Hunter Sprinkler Performance 
Charts are featured on the back cover. 

While developing the Liters Per Minute (l/min), Working Pressure 
and Pipe Sizing charts, we considered reasonable friction loss and 
acceptable water velocity for a residential irrigation system. If you 
have any questions on the design or installation process, your 
best resource is your local Hunter distributor.

Hunter recommends contracting the services of a professional 
irrigation designer when planning large residential or commercial 
projects. Contractors and irrigation designers can receive 
additional information by contacting their local Hunter distributor.

Table of Contents

Plot Plan and Design ...............................................................  1

Sprinkler System Design Capacity ........................................... 2

Service Line Size Chart

System Design Capacity Chart

Select Sprinkler Heads ............................................................. 3

Locating Sprinkler Heads ......................................................... 4

Divide Sprinklers Into Zones .................................................... 5

 Area Capacity Example

Locate Valves and Size Pipes ................................................... 6

 Pipe Sizing Chart

Point of Connection ................................................................. 7

Sprinkler System Overview .................................................. 8–9

System Installation ........................................................... 10–12

 Making the Point of Connection

 Installing the Main Line

 Installing the Valve Manifolds

 Installing the Lateral Lines

 Installing the Controller

 Installing Heads

 Backfilling

Materials List .................................................................... 13–15

Glossary of Terms ................................................................... 16

Watering Guidelines ..................................... Inside Back Cover

Summary of Contents for Residental Sprinkler System





















Reviews: