8
®
Pump Start/MV Circuit,
Programmable By Station…
Activate a pump or master valve
only when needed
A programmable pump start circuit can
activate a pump relay or master valve by
individual zone. For systems that require
only certain zones to receive a boost in
pressure from a pump (such as rotor zones)
this programmable MV circuit feature is
the perfect solution, since it allows the
pump to only operate when needed.
Internal Junction Box…
Primary power connection made
inside the controller
No extra trips to the distributor for a for-
gotten electrical box. The Pro-C comes
with a primary power junction box built
inside the cabinet. Installation time is
reduced because a J-Box does not have to
be fitted and screwed down tight. All that
is required for proper installation is electri-
cal conduit.
24 VAC Valve Test…
Easy arrangement of zones during
wire hookup
When wiring up the controller so
numbered irrigation zones will run in
sequential order, installers find that an
“always on” 24 VAC valve test terminal
post simplifies this process. Touching the
valve wire to a hot 24 volt terminal
to determine numbered zones without
having to program a ‘manual start’ in the
controller makes wire installation quick
and efficient.
Primary Voltage Source Choices…
Indoors or outdoors, operates off a variety
of power sources
Pro-C models can be supplied with a 110
VAC/60 Hz transformer for domestic use
or a 230 VAC/50 Hz transformer for inter-
national use. This versatile transformer
selection enables users to install the Pro-C
anywhere in the world.
AM/PM or 24 Hour Clock Settings…
Choose your favorite method of
timekeeping
Operating the controller in either
AM/PM mode or in 24-Hour mode
is selectable by the user. The
Pro-C allows the user to pick the
time format that is most desirable.
Wherever you are in the world, the
Pro-C can operate under local time
keeping preferences.
Single Station Manual Start…
If all that is needed is a little extra on a
single zone!
Many times throughout the year and for
many reasons (e.g., watering fertilizer or
pesticides into the soil, spot seeding), the
user will want to add extra water to a
particular zone. With single station manual
start, the Pro-C is able to accomplish that
task. Just turn the dial to Manual-One Sta-
tion, use the arrow button to move to the
desired station, then turn the dial to the
Run position. The user may also increase
or decrease the run time setting if pre-
ferred. After the zone is finished, the con-
troller will return to automatic mode with
its original schedule, even if modified for
the manual operation.
Internal
J-Box
PRODUCT FEATURES AND BENEFITS
(Continued)
Summary of Contents for Pro-C
Page 35: ......
