17
Component:
The ABS unit consists of a hydraulic control unit, an ECU control unit and a motor. A wheel speed sensor is mounted on
the front and rear wheels.
Brief introduction to the brake system principle:
The brake system uses disc brakes, so the front and rear wheel brakes are equipped with ABS function. In normal
operation mode, the brake system functions the same as the brake system without ABS. Only when the wheel tends to
lock, this information is fed back to the ABS control unit through the wheel speed sensor, and the ABS will recognize the
brake pressure to start working. This adjustment can be felt by a slight jump on the brake hand lever or brake pedal.
Warning light:
After the ignition switch is turned on, the ABS warning light is on. When the first riding speed is over than 5km, after the
self-test, the alarm light is off, and then in the same ignition cycle, if there is no abnormality, the alarm light remains off,
and the ABS works normally. If the ABS is constantly lit during driving (≥5km/h), or suddenly lights up during driving, there
is a fault in the ABS. At this time, ABS cannot be activated normally, ABS function is invalid, and maintenance is
recommended. But the brake system itself still works, but the ABS adjustment system is out of order.
ABS System
Summary of Contents for MAVERICK MV500
Page 1: ...MAVERICK MV500 OWNER S MANUAL 1...
Page 34: ...34 5 Warranty and Service Card...
Page 36: ...36 Scheduled Routine Maintenance...
Page 37: ...37 Work History...
